Able to set up proxy sites of their own and has already owned a few proxy sites.
Has a Google Adsense Account.

Now that we are aware of the prerequisites, we’ll have a look into the steps to follow so that you start earning right away:

Get a domain: Since we are focusing on a single domain for a long time, we can put a little effort in choosing a good domain name. The domain name should be short and easy to remember. It should also have a highly searched keyword like “unblock”,”anonymous”,”bypass”, etc. Don’t worry about the competition in these words – proxy keywords are still having very low competition and you don’t need to rank in the first page – as first paged proxies get blocked easily. So, we have domain name like unblock???.com(note the? which represents any character). Buy this domain and point the name-servers to your hosting account’s (which we will choose in the next step) name-servers.
Get a Proxy Hosting Account: Choosing a good proxy host is very crucial in the proxy business. If your proxy host is overloaded, users will leave your site. If it is too expensive as most proxy hosting providers are, your profit will go down. So, choose a proxy hosting service which is not bad and not so expensive. I’d recommend buying a VPS or a dedicated server if you are going for a long run.
Set up your Proxy Site: Setting up your proxy site is easy. First you have to choose a proxy script – available options are Phpproxy, CGIproxy, glype, zelune, etc. Glype is the most popular. You can customize your proxy script by adding a new theme and repositioning the ads. It’s good to place 2 square ad units and 1 leaderboard ad. You can also add a link unit at the bottom of the url box. Upload the files to your webserver and test it properly. Make sure your ads are running properly.
Promoting Your Proxy: Your website is now ready for revenue generation. You can now earn $20 in day 1 itself. There are various ways to bring traffic to your site. Let’s concentrate on a few but most powerful.

Proxy.org Promotion: Proxy.org is the giant of proxies. It has some hundreds of thousands of users per day. You can drive huge traffic to you proxy site from proxy.org. A simple way is to submit your proxy site into their free listing but that requires a backlink to proxy.org. A much better way is to use the premium advertisements offered by proxy.org. Out of the various premium listings, the best one is the EMAIL BLAST. Use this service and you will get so much traffic in a day to earn $30-$40 per day. And guess what, you have to pay only $5 for a single Email Blast. You can use the email blast repeatedly but don’t do it for the next 7 days. Let the previous email blast drive traffic to your site. This way you can earn way more than $20 per day. Try this and if you fail to get your $5 back, I’ll refund you your $5.
SEO: The Proxy.org promotion is for short term and the traffic decreases with time. For a long term traffic, Google is the biggest Source. You would become a fool if you don’t optimize your proxy site for Google. So, start a bit of SEO, optimize your site’s title, meta tags, content,etc. You might not get a good position in Google right away but in the long run, it will earn it’s place in the SERPS.
Proxy Submission: Submit your proxy to some of the Top proxy list sites. Submit it only in some high traffic sites because you don’t want your proxy site to look like a link farm. Submit it only to the top proxy sites like proxy.org, topbits, proxy sites, proxy etc.
Proxy Groups: Search in google for “site:groups.google.com proxy sites” and site:answers.yahoo.com proxy sites and go to the top pages and share your proxy with the users out there.
Share it: Share your proxy with friends in Digg, stumbleupon, twitter, etc. and create pages for your proxy in squidoo, hubpages with backlinks to your site. These will ultimately bring more traffic to your site.

Revenue Optimization: Google Adsense is the best as many people say. But the CPC of adsense seems to fall with time. If you are seeing this fall of CPC, you might need to update your site a little bit. try adding a news feed or some dynamic content. And if the CPC is still falling like below $1 per 1K, you can try other options like xtendmedia, smowtion,etc. Also, don’t forget to monetize your proxified pages with ad networks like adbrite, adversal, etc. This will generate a good revenue if your users are primarily from US.

Well, this is the end of the instructions on how to earn $20 from proxy sites. If you follow the steps properly, you will surely earn enough to get your investments back. Anyways, is there any business out there without 0 risk? It all depends on your capability. So, be confident and try hard. You can earn even more than me.:).. Have fun.

Watch the video related to expired domain traffic

Help answer the question aboutexpired domain traffic

Optimize the images in your website 

It is well known fact that loading time of any website directly affects the user’s response to a website; viewers hate to wait for long to get the website to be fully loaded.

Images play a vital role on the loading of a website so it’s very important to take optimal size of the image in order to load the webpage faster. Photoshop and similar image editing software include a feature called “Save for the web”. Always use this feature since it will reduce the image size and load time substantially.

Image formats

In order to optimize the images it is very important to choose the right format. There are different formats based on the type and size of the image, which can be used effectively by following these rules:

JPEG: Stands for Joint Photographic Experts Group. This format was created for photographs and fine art-work. You should use JPEG images whenever you are displaying a photo or a true-color image. Use a 50% compression rate for optimal results with these images.

GIF: Stands for Graphics Interchange Format. The GIF is most favorable format for internet, mainly because of its small size. GIF is also used for animated images. JPEG images support millions of colors while GIF ones will integrate a maximum of 256 colors. You should use this format for flat-color images like logos, buttons or text images.

PNG: Stands for Portable Network Graphics. This format was specifically made to replace GIF images on the internet. The main advantage of PNG images over GIF ones is that they support 24-bit colors and alpha transparency. That said not all the browsers recognize some of its features. You should use the PNG format for simple images that require more than 256 colors.

Use the height and width tags

When you use images or tables on your pages you should always include the height and width tags. If the browser does not see those tags it will need to figure the size of the image, then load the image and then load the rest of the page. Here is an example of code containing those tags:

<img src=”http://www.himshilp.com/images/himshilp_logo.gif” width=”197″ height=”71″ border=”0″ alt=”" />

When the height and width tags are included the browser will automatically know the size of the image. As a consequence it will be able to hold a place for the image and load the rest of the page contemporaneously. Apart from the improvement on the load time of the page this method is also more user friendly since the visitor can start reading the text or other information while the image is being downloaded.

Don’t scale images in HTML

Don’t use a bigger image than you need just because you can set the width and height in HTML. If you need
<img width=”100″ height=”100″ src=”banner.jpg” alt=”banner” />
then your image (banner.jpg) should be 100×100px rather than a scaled down 500×500px image.

Reduce cookie size

HTTP cookies are used for a variety of reasons such as authentication and personalization. Information about cookies is exchanged in the HTTP headers between web servers and browsers. It’s important to

• Keep the size of cookies as low as possible to minimize the impact on the user’s response time.
• Eliminate unnecessary cookies
• Be mindful of setting cookies at the appropriate domain level so other sub-domains are not affected
• Set an Expires date appropriately. An earlier Expires date or none removes the cookie sooner, improving the user response time.

Flush the Buffer early

When users request a page, it can take anywhere from 200 to 500ms for the backend server to stitch together the HTML page. During this time, the browser is idle as it waits for the data to arrive. In PHP you have the function flush(). It allows you to send your partially ready HTML response to the browser so that the browser can start fetching components while your backend is busy with the rest of the HTML page. The benefit is mainly seen on busy backends or light frontends.

A good place to consider flushing is right after the HEAD because the HTML for the head is usually easier to produce and it allows you to include any CSS and JavaScript files for the browser to start fetching in parallel while the backend is still processing.

Remove duplicate java scripts

Duplicate scripts hurt performance by creating unnecessary HTTP requests and wasted JavaScript execution.

In addition to generating wasteful HTTP requests, time is wasted evaluating the script multiple times.

One way to avoid accidentally including the same script twice is to implement a script management module in your templating system. The typical way to include a script is to use the SCRIPT tag in your HTML page.

      <script src=”menu_1.0.18.js”></script>

An alternative in PHP would be to create a function called insertScript.

      <?php insertScript(“menu.js”) ?>

In addition to preventing the same script from being inserted multiple times, this function could handle other issues with scripts, such as dependency checking and adding version numbers to script filenames to support far future Expires headers

Put Stylesheets at the Top

Moving stylesheets to the document HEAD makes pages appear to be loading faster. This is because putting stylesheets in the HEAD allows the page to render progressively.

This is especially important for pages with a lot of content and for users on slower Internet connections. The importance of giving users visual feedback, such as progress indicators, has been well researched and documented. In our case the HTML page is the progress indicator! When the browser loads the page progressively the header, the navigation bar, the logo at the top, etc. all serve as visual feedback for the user who is waiting for the page. This improves the overall user experience.

The problem with putting stylesheets near the bottom of the document is that it prohibits progressive rendering in many browsers, including Internet Explorer. These browsers block rendering to avoid having to redraw elements of the page if their styles change. The user is stuck viewing a blank white page.

Put Scripts at the Bottom

The problem caused by scripts is that they block parallel downloads. If you serve your images from multiple hostnames, you can get more than two downloads to occur in parallel. While a script is downloading, however, the browser won’t start any other downloads, even on different hostnames.

In some situations it’s not easy to move scripts to the bottom. If, for example, the script uses [removed] to insert part of the page’s content, it can’t be moved lower in the page. There might also be scoping issues. In many cases, there are ways to workaround these situations.

Flush the Buffer Early

When users request a page, it can take anywhere from 200 to 500ms for the backend server to stitch together the HTML page. During this time, the browser is idle as it waits for the data to arrive. In PHP you have the function flush(). It allows you to send your partially ready HTML response to the browser so that the browser can start fetching components while your backend is busy with the rest of the HTML page. The benefit is mainly seen on busy backends or light frontends.

A good place to consider flushing is right after the HEAD because the HTML for the head is usually easier to produce and it allows you to include any CSS and JavaScript files for the browser to start fetching in parallel while the backend is still processing.

Example:

      … <!– css, js –>  

   </head>

    <?php flush(); ?>

     <body>

… <!– content –>

Make favicon.ico small and cacheable

The favicon.ico is an image that stays in the root of your server. It’s a necessary evil the browser will always request it, even if you don’t care about it, so make sure that this  file is always present in the server. This image also interferes with the download sequence, so if you are using a favicon in your website make sure that it’s small, preferably under 1K.

Optimizing CSS

Cascading Style Sheets(CSS) make websites much more structured because they allow the browsers to cache style-related information from the .css file directly, eliminating the need to read that information every time a single page is loaded. Even if Style Sheets are naturally more efficient than HTML tables you can still optimize the CSS code to make your website cleaner and faster. Remove whitespaces as and when possible. Avoid repetition of the code wherever possible to make your style-sheets lighter. Use Shorthand Properties, Take Advantage of Your Inheritance, Use Grouping, Cut the Comments, Apply Styles Wisely.

Use a slash to display a directory

When a server opens a link in the form of “http://www.himshilp.com/seo-articles” it will need to figure what kind of file or webpage is contained on that address, wasting time on the process. If instead of using that link you include a slash (”/”) at the end like “http://www.himshilp.com/seo-articles/” the web server will already know that the link points to a directory, reducing the time to load the page.

Reduce the HTTP Requests

When a user is opening your website every object on the page (e.g. images or scripts) will require a visit to the server. Those HTTP requests will delay the response time of your site, and if you are loading number of objects this delay can add up to several seconds.

By reducing the number of objects on your website, we can reduce the delay from HTTP requests. Delete unnecessary images, headers, styling features and the like. If possible you can also combine 2 or more adjacent images into a single one.

Secondly make sure that your requests for external files or scripts are combined in a single location.

Add an Expires or a Cache-Control Header

We should refer the following as a rule:

• For static components: implement “Never expire” policy by setting far future Expires header.
• For dynamic components: use an appropriate Cache-Control header to help the browser with conditional requests .

Web page designs are getting richer and richer, which means more scripts, stylesheets, images, and Flash in the page. A first-time visitor to your page may have to make several HTTP requests, but by using the Expires header you make those components cacheable. This avoids unnecessary HTTP requests on subsequent page views. Expires headers are most often used with images, but they should be used on all components including scripts, stylesheets, and Flash components.

Avoid too many banner ads

Don’t waste your valuable website real estate on flashing banner ads, as they are most of the time ignored by the visitors, and they make your webpage heavy to be loaded. Provide more valuable content instead. Then mix in some relevant affiliate links within your website’s body content, this helps your website visitors feel that they want to buy instead of feeling like they are being pushed into buying.

Avoid background music

If you really want your visitors to remain long on your web site, reading your content, the very least you should do is ensure that they aren’t put off by annoying background music looping on your website. Not only this type of music will bother the visitor but delay your webpage’s loading time. If you really feel you must use background music at least make sure visitors have some control over it – give them the option of volume or muting controls at the very least.

Minify Javascript and CSS

Minification is the practice of removing unnecessary characters from code to reduce its size thereby improving load times. When code is minified all comments are removed, as well as unneeded white space characters (space, newline, and tab). In the case of JavaScript, this improves response time performance because the size of the downloaded file is reduced. Two popular tools for minifying JavaScript code are JSMin and YUI Compressor. The YUI compressor can also minify CSS.

Obfuscation is an alternative optimization that can be applied to source code. It’s more complex than minification and thus more likely to generate bugs as a result of the obfuscation step itself.

Avoid redirects

Redirects slow down the user experience. Inserting a redirect between the user and the HTML document delays everything in the page since nothing in the page can be rendered and no components can start being downloaded until the HTML document has arrived.

Webserver Log Analysis:

The logs that your webserver keep are an open book to teach where and when errors occur. The most important part in the logs are the 404 and 500 errors that represent a missing page. It means that a visitor or a web crawler requested that page and it’s missing. This again does not have so much of an effect when it comes to speed but it’s a good idea to try and repair the bottlenecks at least for the sake of user experience. Almost any web hosting provider offer a log analizer such as awstats

Surely there can be many other methods also like avoid using flash as much as possible because, usually, flash loads harder due to their sizes. Remove the HTML comments from your pages, because comments can slow your website down. Big or small, comments have something to say when it comes to page size. Actually you should remove everything from your website which you don’t really require. Avoid nested tables, it effects browser’s reading time. Avoid full page tables for fast rendering. The browser won’t show anything until it’s read the whole thing that way. For a faster loading webpage, either use multiple tables (not nested) or put some content above the main table to make your content in the first table show up faster. In this way you can provide something to read to your visitors while the rest of your page loads.

I think by reading this article you must have got a nice idea of restructuring your website in a way so that it takes less time to get displayed and in turn it will also increase the traffic to your website, which is truly essential in today’s age.

Watch the video related to expired domain traffic

Help answer the question aboutexpired domain traffic

Although the Internet Protocol IPv4 was giving efficient service over than 20 years ,

but the new Internet Protocol IPv6 provides higher efficiency like having enough

level of IPs, stronger security and mobility. In fact it is good to evaluate the performance benefits that we can get from IPv6 protocol in compare to the IPv4 protocol. We can upgrade the existing IPv4 infrastructure to the next generation Internet Protocol(IPv6) and get its advantages using the transition mechanisms.

When IPv4 was designed most of networks had just few nodes, low bandwidth, high latency, and high error rates. Most common applications at that time were FTP,e-mail, and so on.In the early 1990’s, the computer industry expanded with coming the personal computers (PCs) to the market. The internet also developed and electronic businesses or e-commerce started. The market demand was the biggest factor in the Internet’s revolution. As the fast grow of the Internet was detected in the early 1990’s, it was

showing that the IPv4 address space would be finish by the end of the century. In this

regard, some mechanisms such as Network Address Translator (NAT) have extended the life of IPv4, but it was not a logical solution.Today, the market looks completely different than it was in the 1980’s. Although FTP, and e- mail are still very popular today but new applications such as video conferencing, Voice-over-IP, E-Commerce, Mobiles, and etc , have led the Internet

Engineering Task Force (IETF) to seek a new Internet Protocol, that we call it IPv6.

IPv4 and IPv6 are incompatible protocols. For this reason, transition to the new protocol cannot be expected to be painless, and will involve significant costs for service providers and customers alike. If we compare the costs of transition with the non-transition mode or using IPv4 with supporting new services, then it can help us identify the best time to start the transition process .Whenever transition begins there will be no single “flag day” on which the all-IPv4 network turns into an IPv6 network. At the Internet level, transition will be a lengthy

process, with the two protocols existing side by side for many years to come. To facilitate transition, the IETF (Internet Engineering Task Force) has set up a work group called ngtrans (Next Generation TRANSition) which specifies mechanisms for supporting interoperability between IPv4 and IPv6. In particular, the group has focused on two major problems:

•How to make IPv6 terminals communicate with IPv4 terminals.

•How to transport IPv6 over an IPv4 network so that IPv6 “islands” interconnected via the IPv4-based Internet can communicate.

This second problem, which is extremely important in the initial stage of IPv6

deployment, will be joined in the future by the reciprocal problem: how to transport

IPv4 over IPv6. However; discussion of this issue have been postponed until the presence of IPv6 reaches to a significant point on the Internet.

Work on these problems has led to the development of a set of transition mechanisms, each targeted to a particular range of uses and applications.

Section 2: IP Overview

Internet protocol is the set of techniques used by many hosts for transmitting data over

the Internet. The current version of the Internet protocol is IPv4, which provides a 32-bit address system.

Internet protocol is a “best effort” system, meaning that no packet of information sent

over it is assured to reach its destination in the same condition it was sent. Often other

protocols are used in tandem with the Internet protocol for data that for one reason or

another must have extremely high fidelity.

Every device connected to a network, be it a local area network (LAN) or the Internet,

is given an Internet protocol number. This address is used to identify the device uniquely among all other devices connected to the extended network.

2.1 : Features of IP

IP is a connectionless protocol. This means that it has no concept of a job or a session.

Each packet is treated as an entity in itself. IP is rather like a postal worker sorting

letters. He is not concerned with whether a packet is one of a batch. He simply routes

packets, one at a time, to the next location on the delivery route.

IP is also unconcerned with whether a packet reaches its eventual destination, or

whether packets arrive in the original order. There is no information in a packet to

identify it as part of a sequence or as belonging to a particular job. Consequently, IP

cannot tell if packets were lost or whether they were received out of order. IP is an

unreliable protocol. Any mechanisms for ensuring that data sent arrives correct and intact are provided by the higher- level protocols in the suite.

2.2 : IP Routing

So how does an IP packet addressed to a computer on the other side of the world find

its way to its destination? The basic mechanism is very simple.

On a LAN, every host sees every packet that is sent by every other host on that LAN.

Normally, it will only do something with that packet if it is addressed to itself, or if

the destination is a broadcast address.

A router is different. A router examines every packet, and compares the destination

address with a table of addresses that it holds in memory. If it finds an exact match, it

forwards the packet to an address associated with that entry in the table. This

associated address may be the address of another network in a point- to- point link, or

it may be the address of the next-hop router.

If the router doesn’t find a match, it runs through the table again, this time looking for

a match on just the network ID part of the address. Again, if a match is found, the

packet is sent on to the address associated with that entry.

If a match still isn’t found, the router looks to see if a default next- hop address is

present. If so, the packet is sent there. If no default address is present, the router sends

an ICMP “host unreachable” or “network unreachable” message back to the sender. If

you see this message, it usually indicates a router failure at some point in the

network.

The difficult part of a router’s job is not how it routes packets, but how it builds up its

table. In the simplest case, the router table is static: it is read in from a file at start- up.

This is adequate for simple networks. You don’t even need a dedicated piece of kit for

this, because routing functionality is built into IP.

Dynamic routing is more complicated. A router builds up its table by broadcasting

ICMP router solicitation messages, to which other routers respond. Routing protocols

are used to discover the shortest path to a location. Routes are updated periodically in

response to traffic conditions and availability of a route. However, the details of how

this all works is beyond the scope of this report.

2.3 : Future of the Internet

As we can see the Internet will have a serious problem in a few years. Due to its

amazing growth and the limitations in its design and facilities , there will be a

problem when no more free addresses are available for connecting to new hosts or

assigning to a new device. At that point, no more new web servers can be set up, no

more users can sign up for accounts at ISPs, and no more new machines can be set up to access the web or join in online games.

Several solutions have been made to solve the problem. A very popular approach is to

not assign a worldwide unique address to every user’s machine, but rather to assign

them “private” addresses, and hide several machines behind one official, globally

unique address. This technique is called “Network Address Translation” or NAT. It

has problems, as the machines hidden behind the global address can’t be addressed,

and as a result of this, opening connections to them which are used in online gaming,

peer-to-peer networking, and etc, is not possible.

A different approach to the problem of Internet addresses getting scarce is to discard

the old Internet protocol with its limited addressing capabilities, and use a new

protocol that does not have these limitations. The protocol or actually, a set of

protocols used by machines connected to form today’s Internet is known as the

TCP/IP (Transmission Control Protocol, Internet Protocol), and version 4 currently in

use has all the problems described above.

Switching to a different protocol version that does not have these problems of course

requires for a new version to be available. And actually, there is a better version.

Version 6 of the Internet Protocol (IPv6) provides future inquiries on address space,

and also addresses other features such as privacy, encryption, and better support of

mobile computing as well.

Assuming a basic understanding of how today’s IPv4 works, this report is intended

as an introduction to the IPv6 protocol. The changes in address formats and name

resolution are covered. After that, it is shown how to use IPv6 by using a simple-yet-

efficient transition mechanism called 6to4.

Section 3 : IPv6 vs IPV4

When telling people to migrate from IPv4 to IPv6, the question you usually hear is “Why?”.

There are actually a few good reasons to move to the new version:

• Bigger address space

• Support for mobile devices

• Built-in security

3.1 : Bigger address space

The bigger address space IPv6 offers is the most obvious enhancement it has over

IPv4. While today’s Internet architecture is based on 32-bit wide addresses, the new

version has 128-bit technology available for addressing. Base on the enlarged address

space, workarounds like NAT don’t have to be used anymore. This allows full, unconstrained IP connectivity for today’s IP-based machines as well as upcoming mobile devices like PDAs and cell phones all will benefit from full IP access through GPRS and UMTS.

3.2 : Mobility

When mentioning mobile devices and IP, it’s important to note that a special protocol

is needed to support mobility, and implementing this protocol that is called “Mobile

IP” is one of the requirements for every IPv6 stack. Thus, if we have IPv6 going, we

have support for roaming between different networks, with global notification when

we leave one network and enter the other one. Support for roaming is possible with

IPv4 too, but there are a number of hoops that need to be jumped in order to get things

working. With IPv6, there’s no need for this, as support for mobility was one of the

design requirements for IPv6.

3.3 : Security

Besides support for mobility, security was another requirement for the successor to

today’s Internet Protocol version. As a result, IPv6 protocol stacks are required to

include IPsec. IPsec allows authentication, encryption, and compression of IP traffic.

Except for application-level protocols like SSL or SSH, all IP traffic between two

nodes can be handled without adjusting any applications. The benefit of this is that all

applications on a machine can benefit from encryption and authentication, and that

policies can be set on a per-host (or even per-network) basis, not per application/service.

Section 4 : IPV6 Addressing

The IPV6 Addressing properties is presented in this section.

4.1: Multiple addresses

In IPv4, a host usually has one IP number per network interface or even per machine

if the IP stack supports it. Only very rare applications like web servers result in

machines having more than one IP number.

In IPv6, this is different. For each interface, there is not only a globally unique IP

address, but there are two other addresses that are of interest: The link-local address,

and the site-local address. The link-local address has a prefix of fe80::/64, and the

host bits are built from the interface’s EUI64 address. The link-local address is used

for contacting hosts and routers on the same network only, the addresses are not

visible or reachable from different subnets. If desired, there’s the choice of either

using global addresses as assigned by a provider, or using site-local addresses.[16]

Site-local addresses are assigned the network address fec0::/10, and subnets and hosts

can be addressed just as for provider-assigned networks. The only difference is that

the addresses will not be visible to outside machines, as these are on a different

network, and their site-local addresses are in a different physical net. As with the 10/8

network in IPv4, site-local addresses can be used, but don’t have to be. For IPv6, it’s

most common to have hosts assigned a local link and a global IP address. Site-local

addresses are rather uncommon today, and is no substitute for globally unique

adresses if global connectivity is required.

4.2 : Multicasting

In IP land, there are three ways to talk to a host: unicast, broadcast, and multicast. The

most common way to talk to a host is by talking to it directly using its unicast address.

In IPv4, the unicast address is the “normal” IP address assigned to a single host, with

all address bits assigned. The broadcast address used to address all hosts in the same

IP subnet has the network bits set to the network address, and all host bits set to “1″

which can be easily done using the netmask and some bit operations. Multicast addresses are used to reach a number of hosts in the same multicast group, which can be machines spread across the Internet. Machines must join multicast groups

explicitly to participate, and there are special IPv4 numbers used for multicast addresses, allocated from the 224/8 subnet. Multicast isn’t used very much in IPv4, and only few applications use it.In IPv6, unicast addresses are used the same as in IPv4, no surprise there all the

network and host bits are assigned to identify the target network and machine.

Broadcasts are no longer available in IPv6 in the way they were in IPv4, this is where multicasting comes into play. Addresses in the ff::/8 network are reserved for multicast applications, and there are two special multicast addresses that supersede the broadcast addresses from IPv4. One is the “all routers” multicast address, the others is for “all hosts”.

The details about IPv6 are in general the way they were proposed in the RFCs by IETF, however we chose to use Microsoft Windows 2003 as the platform to implement the tests. Due to their early stages of development, the IPv6 protocol stack in Windows 2003 still has many problems, such as fragmentation issues, no support

for IPSec, a native security feature, etc…

Microsoft has two different implementations of an IPv6 stack both for Windows NT 5.0 and Windows 2003. The older stack, known as the “Microsoft Research IPv6 Release 1.4”, works under both NT 4.0 and Win2K; the newer stack, known as the

“Microsoft IPv6 Technology Preview for Windows 2003” works under Windows 2003. Both stacks require an existing IPv4 stack to be previously installed.

Once installed, besides giving the Windows environment the support for IPv6, it

creates a whole new set of routines, such as “ping6”, “tracert6”, which are similar in

function to “ping” and “tracert”, but work with the new IPv6 stack. The good part about the IPv6 implementation that Microsoft created is that they embedded the IPv6 socket creation in the Winsock2 API. That means that they added a few more functions when you create the sockets, however, the fundamentals remained the same,

and thus a programmer that can make an IPv4 application can most likely learn how

to make a simple IPv6 application as well.

Internet Protocol version 6 is designed as an evolutionary upgrade to the Internet

Protocol (IPv4) and will, in fact, coexist with the older IPv4 for some time. IPv6 is designed to allow the Internet to grow steadily, both in terms of the number of hosts connected and the total amount of data traffic transmitted; it will have a 128 bit address looking like FFFF:FFFF:FFFF:FFFF, and it will support up to

340,282,366,920938,463,463,374,607,431,768,211,456unique addresses.in Table1 we can see the advantages of IPV6 versus IPV4 .

The IPv6 header is always present and is a fixed size of 40 bytes. The fields in the

IPv6 header are described briefly below.

The fields in the IPv6 header are:

Version – 4 bits are used to indicate the version of IP and is set to 6.

Traffic Class – Indicates the class or priority of the IPv6 packet. The size of this field

is 8 bits.The Traffic Class field provides similar functionality to the IPv4 Type of

Service field.

Flow Label – Indicates that this packet belongs to a specific sequence of packets

between a source and destination, requiring special handling by intermediate IPv6

routers. The size of this field is 20 bits. The Flow Label is used for non-default quality

of service connections, such as those needed by real- time data (voice and video). For

default router handling, the Flow Label is set to 0. There can be multiple flows between a source and destination, as distinguished by separate non-zero Flow Labels.Payload Length – Indicates the length of the IP payload. The size of this field is 16 bits. The Payload Length field includes the extension headers and the upper layer PDU. With 16 bits, an IPv6 payload of up to 65,535 bytes can be indicated. For payload lengths greater than 65,535 bytes, the Payload Length field is set to 0 and the Jumbo Payload option is used in the Hop-by-Hop Options extension header.

Next Header – Indicates either the first extension header (if present) or the protocol

in the upper layer PDU (such as TCP, UDP, or ICMPv6). The size of this field is 8

bits. When indicating an upper layer protocol above the Internet layer, the same

values used in the IPv4 Protocol field are used here.

Extension Header – Zero or more extension headers can be present and are of

varying lengths. A Next Header field in the IPv6 header indicates the next extension

header.Within each extension header is another Next Header field that indicates the

next extension header. The last extension header indicates the upper layer protocol

(such as TCP, UDP, or ICMPv6) contained within the upper layer protocol data unit.

The IPv6 header and extension headers replace the existing IPv4 IP header with options. The new extension header format allows IPv6 to be augmented to support future needs and capabilities. Unlike options in the IPv4 header, IPv6 extension headers have no maximum size and can expand to accommodate all the extension data

needed for IPv6 communication.

Hop Limit – Indicates the maximum number of links over which the IPv6 packet can

travel before being discarded. The size of this field is 8 bits. The Hop Limit is similar

to the IPv4 TTL field except that there is no historical relation to the amount of time

(in seconds) that the packet is queued at the router. When the Hop Limit equals 0, the

packet is discarded and an ICMP Time Expired message is sent to the source address.

Source Address –Stores the IPv6 address of the originating host. The size is 128 bits.

Destination Address – Stores the IPv6 address of the current destination host. The

size of this field is 128 bits. In most cases the Destination Address is set to the final

destination address.

However, if a Routing extension header is present, the Destination Address might be

set to the next router interface in the source route list.

Section 5 : Transition Mechanisms

As IPv6 is finally beginning to mature, it is evident that methods of upgrading the

Internet need to be found. One idea would be to turn off the entire Internet at 12 pm,

upgrade the network infrastructure include routers, protocol stacks, …and turn the

Internet back on at 6 am and hope everything works fine and correct.

This is unrealistic due to the fact that it would cost more money than it is imaginable,

the time would be way too short, and nothing ever works as good as it is in theory.

More gradual transition methods have evolved, ones which are likely to happen over

the course of 10 years or so. Some of the transition mechanisms are:

Dual Stack

SIIT – Stateless IP/ ICMP Translator

AIIH – Assignment of IPv4 Global Addresses to IPv6 Hosts

NAT – Protocol Translator – has scaling and DNS issues, and has single point of failure disadvantage

Tunnel Broker – dynamically gain access to tunnel servers, but has authentication and scaling issues;

6-to-4 Mechanism – dynamic stateless tunnels over IPv4 infrastructure to connect 6-to-4 domains

IPv6 in IPv4 tunneling – Allows existing infrastructure to be utilized via manually configured tunnels

o Host-Host Tunneling

o Router-Router Tunneling

o Host-Router and vice versa Tunneling

5.1 : Dual Stack:

The basic approach for permitting all communications is the so-called dual stack IP,

where each new host, server, router or other item of equipment dealing with the IP level can support both protocols. In this way, communication between IPv6 terminals

takes place directly, while an IPv4/IPv6 terminal which must communicate with an IPv4-only terminal can do so in IPv4. This approach is not particularly burdensome for hosts and servers, as it is a software upgrade which has no significant impact on the system. Nevertheless, the main drawback of this approach is the need to maintain

a multi-protocol network with a double routing infrastructure, which increases administrators’ work load. In addition, generalized use of the dual stack IP model will not be possible when address space exhaustion reaches the point that new IPv4 addresses can no longer be assigned.

To overcome these problems, several solutions for interoperation between IPv6-only networks and IPv4-only networks have been specified which permit end-to-end communication between heterogeneous terminals:

•Dual stack IP ALG devices which make it possible to perform protocol translation at the borders between non-homogeneous networks through the use of application proxies implemented on dual stack servers.

•NAT-PT (Network Address Translator – Protocol Translator) devices, which make it possible to perform address and protocol translation at the borders between non-homogeneous networks at IP level.

•The Dual Stack Transition Mechanism, or DSTM, which proposes to use the dual stack IP approach on the basis of IPv4 addresses assigned dynamically only when needed, and the use of IPv4 over IPv6 tunneling in order to cross the local IPv6 network before accessing the outer IPv4 network.

Though these transition mechanisms have the same shortcomings as the similar mechanisms proposed for interconnecting separate IPv4 networks, they provide a significant advantage for the future. Thus, while the mechanisms for IPv4 are final,and can no longer be done without, those for the transition towards IPv6 are instrumental in ensuring coexistence between IPv4 and IPv6, which should come to an end once the Internet operates entirely under IPv6.

IPv6 was delivered with migration techniques to cover every conceivable IPv4 upgrade case, but many were ultimately rejected by the technology community, and today we are left with a small set of practical approaches.

Dual stack is involve with running IPv4 and IPv6 at the same time. End nodes and routers/switches run both protocols, and if IPv6 communication is possible that is the preferred protocol.

A common dual-stack migration strategy is to make the transition from the core to the

edge. This involves enabling two TCP/IP protocol stacks on the WAN core routers,then perimeter routers and firewalls, then the server-farm routers and finally the desktop access routers. After the network supports IPv6 and IPv4 protocols, the process will enable dual protocol stacks on the servers and then the edge computer

systems.

Another approach is to use tunnels to carry one protocol inside another. These tunnels

take IPv6 packets and encapsulate them in IPv4 packets to be sent across portions of the network that haven’t yet been upgraded to IPv6.

Other techniques, such as network address translation–protocol translation (NAT-PT)

simply translate IPv6 packets into IPv4 packets. These translation techniques are more

complicated than IPv4 NAT because the protocols have different header formats.Translation techniques were intended to be used as a last resort. Using dual-stack and tunneling techniques is preferable to using NAT-PT.

It will be easier to try to run everything in a dual-stack mode first and then remove the

IPv4 protocol over time. Currently there aren’t many systems being developed for IPv6-only communications, but there are many systems that work in dual-stack mode. Microsoft’s new operating systems, for example, have a dual-layer architecture that makes for seamless operation of either protocol. Therefore, migration plans should maximize the use of dual stack and minimize the amount of tunneling. It should also

be mentioned that running dual stack is not the final state. We can’t forget that full

migration to IPv6 is the final destination.

Dual stack IPV4/IPV6

In the 1990s the network industry used the phrase “Switch where you can, route where you must.” However, over time the performance gap between routing and switching closed. For IPv6 transitions the new moniker will be “Dual stack where you can, tunnel where you must.”

5.2 : IPv6 in IPv4 tunneling:

IPv6 in IPv4 tunneling is one of the easiest transition mechanism by which two IPv6

hosts / networks can be connected with each other while running on existing IPv4 networks through establishing some special routes called tunnels. In this technique, IPv6 packets are encapsulated in IPv4 packets and then are sent over IPv4 networks like ordinary IPv4 packets through tunnels. At the end of tunnel these packets are

decapsulated to the original IPv6 packets.

The following are some important characteristics of tunneling mechanism:

When encapsulating a datagram, the TTL in the inner IP header is decremented by

only one if the tunnel is being done as part of forwarding the datagram; otherwise the

inner header TTL is not changed during encapsulation. If the resulting TTL in the

inner IP header is zero, the datagram is discarded and an ICMP Time Exceeded message is returned to the sender.

Therefore, an encapsulator will not encapsulate a datagram with TTL=0.

Encapsulation of IPv6 in IPv4:

o Utilizes IPv4 routing and properties.

o Loses special IPv6 features.

o Requires a hole in firewall to allow through protocol 41 (IP in IP).

There are two types of tunnels: manual and dynamic. Manually configured IPv6 tunneling requires configuration at both ends of the tunnel, whereas dynamic tunnels are created automatically based on the packet destination address and routing. Dynamic tunneling techniques simplify maintenance compared with statically

configured tunnels, but static tunnels make traffic information available for each

endpoint, providing extra security against injected traffic.

There are, in fact, concerns over the security of tunneling techniques. For example, with dynamic tunnels it isn’t easy to track who is communicating over the transient tunnels, and you don’t know the tunnel destination endpoint. It is a scary proposition when your routers communicate with other nonauthenticated routers. It is also

possible to send forged traffic toward a tunnel endpoint and get traffic spuriously inserted into the tunnel. Tunneling creates situations in which traffic will be encapsulated, and many firewalls won’t inspect the traffic if it is in a tunnel. Allowing IP Protocol 41 (IPv6 encapsulated in IPv4) through an IPv4 firewall is not a best

practice. This is like creating an “IPv6 permit any any all” rule through the firewall.

Tunnels will constantly have to be changed and monitored as your transition progresses. Tunnels will also have to be removed when the IPv6 ocean gets larger and we migrate to full IPv6. Tunnels are, therefore, just a transitional technique, and troubleshooting in an environment full of tunnels will be challenging.

Dynamic tunnel techniques don’t create tunnel interfaces that can be monitored with SNMP. Dynamic tunnel techniques such as 6 to 4 use 2002::/16 addresses, which means you will need to re-address the network twice as part of the transition to IPv6.

Many of the dynamic tunneling techniques are also unable to forward multicast traffic and can’t traverse an IPv4 NAT in the middle of the network.

If a tunnel falls entirely within a routing domain, it will be considered as plain serial

link by interior routing protocol such as RIP or OSPF. But if it lies between two routing domains it needs exterior protocols like BGP etc..

In case of congestion in the tunnel, an ICMP Source Quench message will be issued in order to inform the previous node of the congestion.

In different types of tunneling, only de/encapsulation points are varied depending on

the start and end of tunnels, however the basic idea remains the same.

IPv6 tunneling enables the iSeries server to connect to IPv6 nodes (hosts and routers) across IPv4 domains. Tunneling permits isolated IPv6 nodes or networks to communicate without changing the underlying IPv4 infrastructure. Tunneling allows IPv4 and IPv6 protocols to cooperate, and thereby provides a transitional method of

implementing IPv6 while retaining IPv4 connectivity.

A tunnel consists of two dual-stack (IPv4 and IPv6) nodes on an IPv4 network. These dual-stack nodes are capable of processing both IPv4 and IPv6 communications. One of the dual-stack nodes on the edge of the IPv6 infrastructure inserts an IPv4 header in front of (encapsulates) each IPv6 packet that arrives and sends it as though it were normal IPv4 traffic, through existing links. IPv4 routers continue to forward this traffic. On the other side of the tunnel, another dual-stack node removes the extra IP header from the IPv6 packet (decapsulates) and routes it to the ultimate destination using standard IPv6.

IPv6 tunneling runs over configured tunnel lines, which are virtual lines. Configured tunnel lines provide IPv6 communications to any node with a routable IPv4 address that supports IPv6 tunnels. These nodes may exist anywhere, that is, within the local IPv4 domain or within a remote domain.

Configured tunnel connections are point-to-point.To configure this type of tunnel

line, you must specify the local tunnel endpoint (IPv4 address), such as 124.10.10.150, and the local IPv6 address, such as 1080:0:0:0:8:800:200c:417a. We must also create an IPv6 route to enable traffic to travel through the tunnel. As we create the route, we will define one of the tunnel’s remote endpoints (IPv4

address) as the route’s next hop. We may configure an unlimited number of endpoints

for an unlimited number of tunnels.

5.2.1 : Host-to-Host Tunneling

In host to host tunneling method, encapsulation is done at source host and ecapsulation is done at destination host. So the tunnel is created in between two hosts supporting both IPv4 and IPv6 stacks. So in this way encapsulated datagrams are sent through the tunnel over the IPv4 network.

Both hosts having dual stack encapsulate the packets of IPv6 in IPv4 packets and transmit over the network as an IPv4 packet utilizing all the characteristics and routing mechanisms of IPv4. With this transition mechanism, it is possible to support IPv6 simply by upgrading the end hosts protocol stacks to IPv6 while leaving the IPv4

infrastructure unchanged.

5.2.2 : Router-to-Router Tunneling

In router to router tunneling mechanism, encapsulation is done at edge router of

originating host and decapsulation is done in the same way at edge router of destined host. The tunnel is created in between two edge routers supporting both IPv4 and IPv6 stacks. Therefore, the end hosts can support native IPv6 protocol stack while the edge routers create the tunnels and handle the encapsulation and decapsulation in order to transmit the packets over the existing IPv4 infrastructure.

The IPv6 datagrams are forwarded from host to edge routers while encapsulation takes place at the router level; similarly at the other end, the reverse process takes place. In this method, both edge routers need to support dual stacks and established a tunnel prior to transmission.

5.2.3 : Host-to-Router Tunneling

In host to router tunneling mechanism, encapsulation is done at originating host and

decapsulation is done in the same way at edge router of destined host and vice versa.

The tunnel is created in between one host and one edge router both of them supporting both IPv4 and IPv6 stacks. So in this way encapsulated datagrams are sent through the tunnel over the existing IPv4 network. The same process can happen the other way around, from one edge router to an end host.

The tunnel is therefore established between the host and the router. In this method one

dual stack supporting router and one dual stack supporting host is required.

5.3 : Overlay Tunnels for IPv6

Overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an

IPv4 infrastructure (a core network or the Internet).By using overlay tunnels, we can

communicate with isolated IPv6 networks without upgrading the IPv4 infrastructure

between them. Overlay tunnels can be configured between border routers or between

a border router and a host; however, both tunnel endpoints must support both the IPv4

and IPv6 protocol stacks as we can see in figure

4 . Cisco IOS IPv6 supports the

following types of overlay tunneling mechanisms:

• Manual

• Generic routing encapsulation (GRE)

• IPv4-compatible

• 6to4

• Intra-Site Automatic Tunnel Addressing Protocol (ISATAP)

Note Overlay tunnels reduce the maximum transmission unit (MTU) of an interface

by 20 octets (assuming the basic IPv4 packet header does not contain optional fields).

A network using overlay tunnels is difficult to troubleshooting. Therefore, overlay tunnels connecting isolated IPv6 networks should not be considered as a final IPv6 network architecture. The use of overlay tunnels should be considered as a transition technique toward a network that supports both the IPv4 and IPv6 protocol stacks or just the IPv6 protocol stack .

5.5 : GRE/IPv4 Tunnel Support for IPv6 Traffic

IPv6 traffic can be carried over IPv4 GRE tunnels using the standard GRE tunneling technique that is designed to provide the services necessary to implement any standard point-to-point encapsulation scheme. As in IPv6 manually configured tunnels, GRE tunnels are links between two points, with a separate tunnel for each

link. The tunnels are not tied to a specific passenger or transport protocol, but in this

case carry IPv6 as the passenger protocol with the GRE as the carrier protocol and

IPv4 or IPv6 as the transport protocol.

The primary use of GRE tunnels is for stable connections that require regular secure

communication between two edge routers or between an edge router and an end system. The edge routers and the end systems must be dual-stack implementations.

GRE has a protocol field that identifies the passenger protocol. GRE tunnels allow

Intermediate System-to-Intermediate System (IS-IS) or IPv6 to be specified as a passenger protocol, which allows both IS-IS and IPv6 traffic to run over the same tunnel. If GRE did not have a protocol field, it would be impossible to distinguish whether the tunnel was carrying IS-IS or IPv6 packets. The GRE protocol field is why

it is desirable that you tunnel IS-IS and IPv6 inside GRE.

5.6 : GRE/CLNS Tunnel Support for IPv4 and IPv6 Packets GRE tunneling of IPv4 and IPv6 packets through CLNS networks enables Cisco CLNS Tunnels (CTunnels) to interoperate with networking equipment from other vendors. The optional GRE services defined in header fields, such as checksums, keys, and sequencing, are not supported. Any packet received requesting such

services will be dropped.

5.7 : Automatic 6to4 Tunnels

An automatic 6to4 tunnel allows isolated IPv6 domains to be connected over an IPv4 network to remote IPv6 networks. The key difference between automatic 6to4 tunnels and manually configured tunnels is that the tunnel is not point-to-point; it is point-to-multipoint. In automatic 6to4 tunnels, routers are not configured in pairs because they treat the IPv4 infrastructure as a virtual nonbroadcast multiaccess (NBMA) link. The

IPv4 address embedded in the IPv6 address is used to find the other end of the automatic tunnel.

An automatic 6to4 tunnel may be configured on a border router in an isolated IPv6 network, which creates a tunnel on a per-packet basis to a border router in another IPv6 network over an IPv4 infrastructure. The tunnel destination is determined by the IPv4 address of the border router extracted from the IPv6 address that starts with the prefix 2002::/16, where the format is 2002:border-router-IPv4-address::/48. Following the embedded IPv4 address are 16 bits that can be used to number networks within the

site. The border router at each end of a 6to4 tunnel must support both the IPv4 and IPv6 protocol stacks. 6to4 tunnels are configured between border routers or between a border router and a host.

The simplest deployment scenario for 6to4 tunnels is to interconnect multiple IPv6 sites, each of which has at least one connection to a shared IPv4 network. This IPv4 network could be the global Internet or a corporate backbone. The key requirement is that each site have a globally unique IPv4 address; the Cisco IOS software uses this address to construct a globally unique 6to4/48 IPv6 prefix. As with other tunnel

mechanisms, appropriate entries in a Domain Name System (DNS) that map between hostnames and IP addresses for both IPv4 and IPv6 allow the applications to choose the required address.

5.8 : Automatic IPv4-Compatible IPv6 Tunnels

Automatic IPv4-compatible tunnels use IPv4-compatible IPv6 addresses. IPv4-compatible IPv6 addresses are IPv6 unicast addresses that have zeros in the high-order 96 bits of the address, and an IPv4 address in the low-order 32 bits. They can be written as 0:0:0:0:0:0:A.B.C.D or ::A.B.C.D, where “A.B.C.D” represents the

embedded IPv4 address.

The tunnel destination is automatically determined by the IPv4 address in the low-

order 32 bits of IPv4-compatible IPv6 addresses. The host or router at each end of an IPv4-compatible tunnel must support both the IPv4 and IPv6 protocol stacks. IPv4-compatible tunnels can be configured between border-routers or between a border-router and a host. Using IPv4-compatible tunnels is an easy method to create tunnels

for IPv6 over IPv4, but the technique does not scale for large networks.

IPv4-compatible tunnels were initially supported for IPv6, but are being deprecated. Cisco recommends that you use the IPv6 ISATAP tunneling technique.

Section 6 : IPV6 Network potential problems

6.1 : Poor IPv6 Network Performance:

Most applications on dual stack nodes will try IPv6 destinations first by default due

to the Default Address Selection mechanism. If the IPv6 connectivity to those

destinations is poor while the IPv4 connectivity is better , the IPv6 traffic experiences higher latency, lower throughput, or more lost packets than IPv4 traffic, applications will still communicate over IPv6 at the expense of network

performance. There is no information available to applications in this case to advise them to try another destination address. An example of such a situation is a node which obtains IPv4 connectivity natively through an ISP, but whose IPv6 connectivity is obtained through a configured tunnel whose other endpoint is

topologically such that most IPv6 communication is done through triangular IPv4 paths. Operational experience on the 6bone shows that IPv6 RTT’s are poor in such situations. An example of such a network is an enterprise network that has both IPv4 and IPv6 routing within the enterprise and has a firewall configured to allow some IPv4 communication,but no IPv6 ommunication.

6.2 : Security Problems in IPV6 over IPV4:

Enabling IPv6 on a host implies that the services on the host may be open to IPv6 communication. If the service itself is insecure and depends on a security policy enforced somewhere else on the network (such as in a firewall), then there is

potential for new attacks against the service.

A firewall may not be enforcing the same policy for IPv4 as for IPv6 traffic, which could be due to misconfiguration of the firewall. One possibility is that the firewall could have more relaxed policy for IPv6, perhaps by letting all IPv6 packets pass through, or by letting all IPv4 protocol packets pass through. In this scenario, the dual stack hosts within the protected network could be subject to different attacks than for IPv4.Even if a firewall has a stricter policy or identical policy for IPv6 traffic than for

IPv4 (the extreme case being that it drops all IPv6 traffic), IPv6 packets could go through the network untouched if tunneled over a transport layer. This could open the host to direct IPv6 attacks. It should be noted that IPv4 packets can also be tunneled, so this is not a new security concern for IPv6. Firewalls must be

deliberately and properly configured.

A similar problem could exist for virtual private network (VPN) software. A VPN could protect all IPv4 packets but transmit all others onto the local subnet unprotected. At least one widely used VPN behaves this way. This is problematic

on a dual stack host that has IPv6 enabled on its local network. It establishes its VPN link and attempts to communicate with destinations that resolve to both IPv4 and IPv6 addresses. The destination address selection mechanism prefers the IPv6 destination so the application sends packets to an IPv6 address. The VPN doesn’t know about IPv6, so instead of protecting the packets and sending them to the

remote end of the VPN, it passes such packets in the clear to the local network.

This is problematic for a number of reasons. The first is that if the node has a default IPv6 route, the packets will be forwarded off-link to an unknown destination.

Another is if no legitimate router is on-link and the node makes the on-link, the packets will simply be sent onto the local link to be potentially viewed by a node spoofing the destination. A third is if a rogue IPv6 router exists on-link. In that case the malicious node will simply be sent all IPv6 packets in the clear.

6.3 : Finding problems in TCP/IP using IPV6:

In this part I want to describe the techniques and tools that we can use to help identify

a problem at successive layers of the Transmission Control Protocol/Internet Protocol

(TCP/IP) protocol stack that is using an Internet Protocol version 6 (IPv6) Internet layer in Microsoft Windows XP , Windows Server 2003 or Windows Vista.

Depending on the type of problem, we might do one of the following:

-Starting from the bottom of the stack and move up.

-Starting from the top of the stack and move down.

The following sections are organized from the top of the stack and describe how to:

-Verify IPv6 connectivity

-Verify Domain Name System (DNS) name resolution for IPv6 addresses

-Verify IPv6-based TCP connections

We can also use Network Monitor to capture IPv6 traffic Although not specified in the following sections, to troubleshoot many problems with IPv6-based communications. Network Monitor is provided with Microsoft Systems Management Server and as an optional network component with Windows Server 2003. However, to correctly interpret the display of IPv6 packets in Network Monitor, we must have

detailed knowledge of the protocols included in each packet.

7.3.1 : Manage Configuration

To manually configure IPv6 addresses, use the netsh interface ipv6 set address command. In Windows Vista, we can manually configure IPv6 addresses from the properties of the Internet Protocol Version 6 (TCP/IPv6) component, available from the Network Connections folder. In most cases, we do not need to manually configure

IPv6 addresses because they are automatically assigned for hosts through IPv6 address auto-configuration.

Also to make changes to the configuration of IPv6 interfaces, we use the netsh interface ipv6 set interface command. To add the IPv6 addresses of DNS servers, use the netsh interface ipv6 add dnsserver command.

7.3.2 : Verify Reachability

To verify reachability with a local or remote destination, try the following:

“Check and flush the neighbor cache” . Similar to the Address Resolution Protocol (ARP) cache, the neighbor cache stores recently resolved link-layer addresses. To display the current contents of the neighbor cache, use the netsh interface ipv6 show neighbors command.

Section 7 : Conclusion

There are some of mechanisms for network administrators to transition their networks

from IPv4 to IPv6. The transition technologies I have presented are robust to slowly and incrementally transitioning groups of networks, as well as mixed protocol support of hosts within individual networks.

My recommendation is using tunneling IPV6 over IPV4 as much as possible to Simplify communications between IPv6 hosts.

I recommend first using tunneling to support both IPv4 and IPv6 applications, then slowly transitioning to pure IPV6 infrastructure. I believe this gradual process will support legacy systems until they are totally replaced, and this will ready the intranet for an IPv6 internet by the time of IPv4 address exhaustion.

Microsoft has more software that has no IPv6 support, but alternatives are available and everything still works on IPv4. It will take some time before everything has IPv6 support, until than both IPv6 and IPv4 can coexist together without any problems. Therefore it is advisable to implement IPv6 as much as possible,

because sooner or later the migration from IPv4 to IPv6 has to be made. Important when deciding to implement IPv6 is to plan everything very carefully. Especially when it comes to services it is important to know whether or not the services installed and configured in your situation are capable of handling IPv6.

Internet service providers may wait till there are enough IPv6 applications to deploy IPv6 networks, and application developers may wait for the IPv6 network to be deployed first. It is up to servers and application developers to take

more and more IPv6 into consideration and also all the business sectors to consider migrating to IPv6, and not waiting for others to be the firsts.

Of course, if everyone waits until the last minute, it could end up costing much

more not just to engineer the transition, but in the cost of the disruption to what has become a crucial part of our economic and social infrastructure.

As I wrote a common dual-stack migration strategy is to make the transition from the

core to the edge. This involves enabling two TCP/IP protocol stacks on the WAN core

routers, then perimeter routers and firewalls, then the server-farm routers and finally

the desktop access routers. After the network supports IPv6 and IPv4 protocols, the

process will enable dual protocol stacks on the servers and then the edge computer Systems.

In my opinion it is not difficult to implement IPv6 in an IPv4 environment and if there

are any hesitations left, this report shows that migration can go without difficulties.

The transition from IPv4 to IPv6 will be a larger task for the industry. It will affect nearly all networked applications, end-systems, frastructure systems, and network architectures.

The conversion to IPv6 has no specific timeline.

However, as noted upper, the rate of IPv4 address using is rapidly decreasing.

Section 9 : References

[1] Borella, M.; Grabelsky, D.; Lo, J.; Taniguchi, K. Realm “Specific IP Protocol Specification.” . IJCSNS International Journal of Computer Science and Network Security .http://tools.ietf.org/html/rfc3103 March 2007

[2] Sawant, A. ” IPv6 Features and Migration from IPv4.” In Bechtel Telecommunications Technical Journal, January 2004. from www.bechteltelecoms.com/docs/bttj_v2/Article8.pdf

[3] T. Chown.” Considerations for IPv6 Tunneling Solutions.”. International Journal of Foundations of Computer Science (IJFCS).April 2004.University of Southampton

[4] China Internet Information Center. “Statistical Survey Report on the Internet Development in China.”. from http://www.cnnic.net.cn/uploadfiles/pdf/2007/2/14/200607.pdf January 2007

[5] S. Daniel Park, “IPv6 Tunnel End-point Automatic Discovery Mechanism”. IJCSNS International Journal .(Sep 2004).

[6] Nevil Brownless, NeTraMet, .” Observations of IPv6 traffic on a 6to4 relay”

IJCSA, International Journal of computer science and application . http://portal.acm.org/citation.cfm?id=1052821 .(Jan 2005)

[7] Daniele Muscetta , “ Connecting to an IPv6 Tunnel Broker ” . IJCSNS International Journal . (2005)

[8] Wright, A. “ Internet Adoption Slowing But Dependence on It Continues to Grow. “. from http://www.ipsosna.com/news/pressrelease.cfm?id=3030 March 29, 2006

[9] Barlow, J. “ IPv6 HandsOn “ IJCSA, International Journal of computer science and application . December 2006

[10] Tsirtsis, G.; Srisuresh, P.” Network Address Translation Protocol Translation (NATPT).” In InternetDraft, .Retrieved December 2006 from http://tools.ietf.org/html/rfc2766

[11] Borella, M.; Montenegro, G. “Address Sharing with EndtoEnd Security. “ In the Proceedings of the Special Workshop on Intelligence at the Network Edge, December 2006 from https://www.usenix.org/publications/library/proceedings/ine2000/full_papers/borella/borella_html/rsipusenix.html

[12] Borman, D.; Deering, S.; Hinden, R. “ IPv6 Jumbograms.” . IJCSNS International Journal . December 2006 from http://tools.ietf.org/html/rfc2675

[13] Carpenter, B.; Moore, K.” Connection of IPv6 Domains via IPv4 Clouds.”

International Journal of Foundations of Computer Science (IJFCS) Decemeber 2006 .

[14] Hupprich, L.; Bumatay, M. Global Internet Population Grows an Average of Four Percent YearOverYear. Nielsen//NetRatings. March 2007 from http://phx.corporateir.net/phoenix.zhtml?c=82037&p=irolnewsArticle&ID=538993&highlight=

[15] [RFC4607] H. Holbrook and B. Cain, “Source-Specific Multicast for IP”, Cisco RFC 4607, August 2006.

[16] IPv6 Task Force, U.S. Department of Commerce.” Technical and Economic Assessment of Internet Protocol Version 6 (IPv6).” January 2006. from http://www.ntia.doc.gov/ntiahome/ntiageneral/ipv6/final/ipv6final.pdf

[17] Metz, C.; Hagino, J. “ IPv4Mapped Addresses on the Wire Considered Harmful.” International Journal of Foundations of Computer Science (IJFCS), December 2006 .

[18] Professor Peter Kirstein, Dr. Tim Chown “Why a new Internet Protocol?”, UKIPV6 Task Force Journal . (2006).

[19] Pekka Savola. CSC/FUNET, Finland .

” Observations of IPv6 Traffic on a 6to4 Relay. “IJCSA, International Journal of computer science and application. (Sep 2007).

[20] Microsoft, “ Microsoft’s Objectives for IPV6 Tunneling” http://technet.microsoft.com/en-us/library/bb726951.aspx (2007),

[21] [RFC4795] B. Aboba, D. Thaler, L. Esibov, “Link-local Multicast Name

zesolution (LLMNR)”, HongKong Computer Society journal. January 2007.

[22] Raymond A. Plzak, “ARIN Board Advises Internet Community on Migration to IPv6.” International Journal of Foundations of Computer Science (IJFCS). (May 2007)

[23] Jeroen van Nieuwenhuizen ( 2007 ). Setting up IPv6 . Project Phoenix The Legend

M. Rahman, Ph.D, Andrew Schaumberg (2007). Transitioning Networks from IPv4 to IPv6.University Plaza, Platteville, USA .

[24] IANA. “ IPv4 Address Report.” International Journal of Foundations of Computer Science (IJFCS) . (March 2007) from http://www.potaroo.net/tools/ipv4/index.html

Watch the video related to expired domain traffic

Help answer the question aboutexpired domain traffic

Using a good domain parking services to monetize expired domain names seems to be a neglected aspect with a number of domain names traders. Domain parking is also an unfamiliar concept to many inexperienced domain name traders. Domain parking is one of the most simple and straightforward monetization techniques in the domain trading industry. With this method, you can have a number of advantages and benefits like:

a) Domain parking offers a stream of ongoing source of income. Though the income earned is very small, you can park a number of domains to earn income from each of them.

b) Domain parking is a simple method that offers you to recover some part of the investment made in purchasing expired domains names.

c) Domain parking offers you a chance to earn income by the way of commission earned by a click through process.

Procedure:
1) Register your expired domain with a good domain parking service provider. Before choosing a particular service, ensure that you are confirming about the terms and conditions, the rate of click through commission and the type of web page they provide.

2) Once you ascertain about the authenticity of the program, you can register for the service by paying a small registration fee.

3) Once you have a confirmed account, the domain parking firm will allot a dedicated web parking page for your expired domain. The page will contain a number of sponsored links, advertising banners and a search box on the top of the page. Premium domain parking services may even insert relevant articles, snippets and content on the page.

4) Once your parked page goes on air, you can expect a small flow of income within a few numbers of days. This income may rise very slowly over a period of several days.

5) You can earn advertising revenue for the traffic generated by your parked page. Some domain parking agencies may share a small potion of income generated, while others allow you to float your Adsense links and keep the entire commission with them.

If you have a series of dead and useless expired-domains in your inventory, domain parking is possibly the best method of extracting money from them. The usual cost of a typical domain parking service may range from $5 to $10. Some of the famous domains parking services are Parked Gold and Godaddy. A good and efficient landing page is a mandatory requirement, if you want to attract more numbers of site visitors. You may wish to park your expired domains with a number of domain parking services. This will allow you to derive maximum possible revenue from your domains. The pay out rate varies among different parking firms. It is possible to mix and match your expired domains with these domain parking firms. In all, domain parking services are an excellent opportunity to create the first viable income source for your expired domains.

Watch the video related to expired domain traffic

Help answer the question aboutexpired domain traffic

Many expired domain speculators and traders realize the critical importance of creating domain traffic to their domains, as it will not only provide them an opportunity of creating business volumes, it may also provide a chance to set up a solid platform to earn a residual type of income. Domain traders are also buying and registering expired domain names that contain highly specialized keywords related to niche products and services. This unique approach provides them a chance to create highly targeted expired domain traffic to the expire domain.

The PPC industry for expired domains is a growing entity and will continue to play an important role in the growth and development of internet business. It is your right time to grab and buy as many expired-domains as possible, to either import domain traffic to your domain or create a partnership with major PPC search engines to make a stable and profitable residual income from the highly targeted and qualified traffic.

Fact: PPC campaign is possible only when you design and set up a web portal by using the expired domain. Let the web portal be as unique and special as possible.

How do you use the extraordinary powers of an expired domain name to create an online source of income?

a) Find out the source of a list of expiring domains (once developed, thrived and making money) and purchase the best out of them as soon as possible.
b) Once you buy the expired domain, start contacting a reliable PPC service provider to enroll your web domain portal (for developed web portals)
c) When potential surfers click on the click link provided at strategic points on a web page, you can receive small amount of revenues for every successful click.

However, the secrets and principles surrounding this wonderful program are still mysterious. To learn these insider secrets, you will need to work hard to understand the basic principles of PPC and its methodologies. Though using the power of PPC program to promote your expired domain is still a new and highly innovative concept, many domain traders are using it to get a solid foothold in the ever growing expired domain name business. The main goal of these would-be entrepreneurs is to supplement the traffic of an existing expired domain web site by redirecting expired traffic to it, or set up a new portal based on the expired domain that is currently receiving a considerable amount of traffic.

Watch the video related to expired domain traffic

Listof.tv [Keywords domain name auction hosting forwarding names registration server domainers auction rick schwartz domaining domainking searchengineworld webmasterworld traffic domaining search domains registrar parking jonathan mizel] And here’s what Wikipedia says about Domain Parking… Domain parking is an advertising practice used primarily by domain name registrars and internet advertising publishers to monetize type-in traffic visiting an under-developed domain name. The domain name will usually resolve to a page containing advertising listings and links. These links will be targeted to the predicted interests of the visitor and may change dynamically based on the results that visitors click on. Usually the domain owner is paid based on how many links have been visited (eg pay per click) and on how beneficial those visits have been. The keywords for any given domain name provide clues as to the intent of the visitor before arriving. Another use of domain parking is to be a placeholder of an existing web site. A company might choose to use this method to redirect its website traffic to another website it owns. Expired domains that were formerly websites are also sought after for domain parking. A domain that was used as a website and is allowed to expire will still maintain most of its prior inbound links. These types of domains usually attract their largest amount of visitor traffic initially after being claimed from the domain drop lists. As website operators <b>…</b>

Help answer the question aboutexpired domain traffic

How can i get a full domain stats for multiple thousands of domains?
I have a daily lists of many types of domains ( expired, pending delete , rgb , available , hold by registrar …etc) , the number of this domains is about between 100,000 – 200,000 per day , So , I need a custom Php/MySQL script that fetch all stats of these domains and store the results in mysql database . What is the solution ?

The required stats are :

-Parse(extract) keyword from domain
-Recognize the dictionary one word of domain .

-Avg Search Results (keyword)
-Avg Search Results (sld)
-Avg Ad Count (keyword)
-Avg Ad Count (sld)

-Alexa Traffic Rank
-Google Page Rank:
-a Fake page rank?
-Google Directory:
-Yahoo Directory:
-Google Backlinks:
-Yahoo Backlinks:
-Alexa Backlinks:
-Altavista Backlinks:
-AllTheWeb Backlinks:
-DMOZ Directory?:
-Google Indexed Pages:
-Yahoo Indexed Pages:
-Bing Indexed Pages:
-Yahoo link popularity:

-Google link popularity :

-Overture (domain):
-Overture (sld):
-Overture (keyword):
-Word Tracker (keyword):

-Average Monthly Search Stats
-Average Monthly Searches :
-Average Cost Per Click (CPC):
-Average Ad Competition:

-Average Monthly Search Stats for keyword without " "
-Average Monthly Searches for exactly keyword phrase with " "

-Number of records at archive.org
-Domain Age accourding whois:
-Number of records at domaintools.com with date of first record :
-Creation Date :

-Update Date:

-Expire Date:
-Registerant name :
-Email(s)of Registrant:
-Registrar Company:
-Determine other Taken Extentions (com , net , org , biz , us and info: .

What are expired domains

Expired domain names are active Web sites that have been promoted by their previous owners. Traffic from these expired sites are being sold by various registrars for a certain amount of registration fee. The idea is that, for a relatively low amount, a Web master can purchase a domain which has pre-existing online traffic and links with other sites.

Another form of these types of services is redirected traffic. Some registrars help a Web site increase its number of hits by redirecting the traffic from existing sites with a similar domain. In this form, a Web site owner will buy not the expired domain name, but the traffic generated by other sites, either expired or existing and are similar or related to the site of the buyer. Traffic or hits are also provided by these registrars from expired sites that are still receiving hits or through type-ins, or keywords typed at the browser by those seeking for these particular sites.

Pros and cons of traffic from expired domain names

The good thing about these types of services is that they can really increase the number of hits that a Web site will receive. The number of hits can translate into more advertisers and higher profits. A site owner can also benefit from association with popular sites that are existing or have expired. However, a lot of scam has been generated by the popularity of expired domain and redirected businesses.

Because of its popularity, a lot of fraudulent activities have been spawned by this type of services. In some cases, the so-called targeted or redirected traffic actually do not exist and are merely junk hits. The underlying logic why some people have claimed that these services are fake is that no Web site operator will let go of assured online visitors for a low amount of fee. If these hits or online visitors do exist, then the site who owns them may as well use these hits for his or her site.

If you buy expired domain traffic, then you better make sure that the purchase is legitimate or you’re buying from a trusted services provider. Redirected traffic or expired domain services do have their benefits, but one needs to know how to sort out the fakes from the real thing. And the best way to do this is to do your homework – conduct a research before making any purchase.

Watch the video related to expired domain traffic

Domain Left: Your source to expired domains. This video is designed to show you where and how to find lists of expired domains with PageRank. Simply go to www.domainleft.com and register your preferred domain.

Help answer the question aboutexpired domain traffic

How do you make immediate cash via the Internet, on a low budget?
So far, there is only ONE thing that resulted in sales, and it did not cost me even one penny. That is AFFILIATE MARKETING via FFA search engine submissions.

I received checks for three sales generated through Free-For-All web site submissions. How can I intentionally duplicate these results geometrically by about a factor of 10, 100, or 1,000?

FYI, I'm a very experienced salesperson, with an excellent web site. It's new, so it's in the Google sandbox. And yes, it only has about 400 links. Therefore, let's not discuss SEO or anything that's related to long-term LINKS or LINKING strategy here. My question is STRICTLY about making IMMEDIATE SALES via the web. (I also own excellent weight loss e-book products and offer online training programs because I am a Certified Lifestyle & Weight Management Consultant.)

I already did PPC, YSM, expired domain traffic, and eBay auctions. All these fail, cost me cash, with no sale or inquiry, just seller fees to pay these vendors.

Help!

Expired domains generally have already been listed with search engines, have acquired their own following and continue to get traffic from people who are unaware that the sites they would like to visit are no longer active. Some web masters take advantage by redirecting traffic from these expired domains to their sites instead.

Advantages of Acquiring Expired Domain Traffic

If you think about it, getting expired domain traffic redirected to your site makes perfect sense. If you have already tried all website promotion tools available to the modern web master yet your web traffic is not showing any improvement, expired domain traffic can give your web stats a mighty boost.

The owners of the previous domain have already worked hard on their domains. They must have done all the website promotion necessary to get their share of internet traffic. Thus, these non-operational sites will continue getting visitors.

These visitors are not doing the expired sites any good. Neither do these visitors get anything out of visiting expired domains. Redirecting expired domain traffic to your site makes for better web traffic to your site while it helps the unwitting souls who would have gained nothing by visiting redundant domains. By redirecting expired domain traffic to your site, everybody wins.

How to Acquire Expired Domain Traffic

There are actually two main methods of getting expired domain traffic redirected to your site. One, you can look for and purchase expired domains yourself or you can make use of an expired domain traffic redirection company. There are advantages and disadvantages to both options.

Purchase and manage your own

In the first alternative, you need to visit domain registration sites selling expired domains. Look for domains that contain the keywords that are likely to bring the visitors you are targeting to your site. After you have purchased these defunct domains, simply set up a redirection mechanism on these domains so that anybody who visits the non-operational site gets redirected to yours.

Purchasing and managing your own expired domains means that you have ultimate control over the redirected traffic that you get. You can choose only expired domains that are getting the kind of visitors you want for your site. Unfortunately, however, it is time consuming to look for and purchase expired domains. It is also quite expensive if you are going to purchase more than a few obsolete domains. It is even more time consuming to manage and continue to develop expired domains in order to provide and sustain a decent traffic flow.

Subscribe to an expired traffic domain service

The second alternative is easier and less expensive. If you engage the services of expired domain traffic services, you won’t need to seek and pay for expired domains yourself since the service provider already has them. Once you subscribe to such a service, the company will begin redirecting traffic to your site from expired domains in its portfolio that fit your website profile.

Unfortunately, some unscrupulous companies will generate false expired domain traffic through unique traffic generation software. In this case, you are paying for so-called expired domain traffic that will not make you any sales. Therefore, if you choose this alternative, make sure that you are getting what you are paying for. Be careful in choosing your provider of expired domain traffic. Redirected Visitors is an established wholesaler of expired domain traffic and continues to set the standard with new technology increasing the level of targeting possible from redirection.

Watch the video related to expired domain traffic

www.revenuedomainsexposed.com – Revenue Domains Exposed ebook and tutorial video course on how to make money with adsense, affiliate marketing and expired domain names

Help answer the question aboutexpired domain traffic

Know any sites that sells cheap expired domains with traffic stats (how many visitors that sites get a month)?
I would like to know how many visitors the domain i had just purchase or i would like to buy has per month

Outsourcing support saves the Web hosting company a lot of money and time. Web hosting companies can focus on selling hosting plans while the outsourced support for the Web host can provide quality support to the customers and manage servers 24/7. The Webhosting company does not need to hire many experts who will check the overall quality of delivery to their existing customers and technical experts for managing/monitoring the server. Top outsourcing companies that provide support for Web hosts have an internal QA team that takes care of the quality.

In Web hosting industry it is critical that the servers are up and running all the time. It is expensive to have technical support staff on a 24/7 basis, add to it the cost of buying the software to help you manage and monitor the servers. Most of the companies that provide outsourced support for hosting companies have a complete setup needed for 24 X 7 support to customers like having 24/7 phone support, managing and monitoring servers and helpdesk support system. These things in mere infrastructure will increase costs of a web host, add to this the time needed to manage this setup and people. Hence outsourcing your hosting support is a smarter way.

Watch the video related to using cpanel

This requested by MileyOnline.net My Voice is weird to me. lol

Help answer the question aboutusing cpanel

How to use BlueVoda, make a cPanel account?
I just downloaded bluevoda, and i have no idea how to use it! Please tell me how to make a click able link or a blog.

How to make a cPanel account?

Related Articles

• Media Classifieds Situations Wanted from MediaPost – Job Career …
• How to Choose a Web Host? List of Important Features | RoFx.Net
• Points to Consider While Choosing Web Hosting Service Provider …
• StreetBallTalk.com – Purchase Calan by Phone
• Gigahertz

• Best Rankings but NO BUSINESS? – Webmaster Forum
• How To Install Wordpress On You Own | Webhosting Reviews
• Instant Setup cpanel hosting services – PP/AP/MB/LR/CC – HOT …
• adım Adım Mysql Güvenliği – WHM/cPanel Support Platform
• Annual 60% OFF!!! | “Truly a summer special offer” | cPanel | 99.9 …

• palashscape: Fwd: [bangla-vision] Asiya Andrabi anti-India …
• How to launch a Web-hosting business a solid foundation? | best …
• About GPS « Travel around the world.
• Web Hosting Services & Solutions in India | MoSo Technology Blog
• Declaration of the Aims & Principles of the FAO – Anarkismo

• Choosing A Suitable Small Business Hosting Service | Branding Today
• Web Hosting Tips to Remember When Choosing a Web Hosting Company …
• How to Choose a Web Host? List of Important Features | RoFx.Net
• FREE PHOTOGRAPHY WEBSITE TEMPLATES » Blog Archive » What You …
• Why Go For Singapore Web Hosting? | Best Web Hosting

• How to Choose the Right Web Design Company to Design Your Website …
• OCDesignerSource.com Announces Launch of Online Specialty Interior …
• Black Hair Growth Vitamin – "Fast Grow" by Exotic Allure
• The Statute of Limitations for Childhood Sexual Abuse in Illinois
• Downturn Creates Opportunity: Nagarro Sees High Demand for …

• Server management by pixeldesignhouse – Linux – Freelance Jobs
• How to launch a Web-hosting business a solid foundation? | best …
• Installation Of Easyscriptpro – Php – Freelance Jobs
• Webhost – Domains – Server – Server Support Forum
• EstHost, Inc: Advanced Account Management Options Applied

• NICF – IT Outsourcing Management for Practitioners | World of Iwan …
• We The Change Interviews Top Speaker from Al Gore's Climate Project
• OCDesignerSource.com Announces Launch of Online Specialty Interior …
• What You Need to Know About Outsourcing Call Centers | Online …
• Sunbelt Software Announces Top Ten Spyware/Malware Threats for August

• How to Select a Web Hosting Company | SEO Complete Solution …
• Web Hosting Tips to Remember When Choosing a Web Hosting Company …
• BUSINESS AND WEB HOSTING SITE » Blog Archive » Cheap Web Hosting …
• FREE PHOTOGRAPHY WEBSITE TEMPLATES » Blog Archive » What You …
• An Introduction To Web Hosting Service | Web Hosting Canberra ACT

• Outsource Support for Web Hosting Companies | Hosting Tutorial …
• Learn How to Set Up / Build Your Forum Website at Your Own Domain …
• BEST WEBHOSTING OPTIONS ?? FIND IT ON WEBHOSTINGCLUE
• How to Gain Links to Your Website | Web Hosting Melbourne
• Why you should be using Search Engine Optimisation. | Web Hosting …

With the increasing demand of internet and with web hosting services at its peak people look dedicated servers, which they can use to increase the popularity of their web hosting business. With dedicated server in the market, people prefer dedicated servers. As dedicated server is expensive, people are looking out for cheap dedicated server, which will give them access to the server, and people can gain their business. The license to the cheap dedicated server can be obtained from resellers at a very nominal and cheap price.

People who are serious developers would require a dedicated server, as the dedicated servers are capable to run complex scripts. The cheap dedicated server is a shred server which will give you the same functionality and can perform the same complex tasks with ease and comfort. The cheap dedicated servers are capable to run software on any platform and the uptime is very high. The up time of this kind of servers are calculated to be 99.9 per cent, which means that in every 1000 hours you can run your website for 999 hours.

By leasing a cheap data server, you can benefit your organization and can maintain your web hosting services easily as the servers are always at good condition and enhance your speed. The service provider provides you support o the maintenance of the software. Hence, obtaining the lease for a cheap dedicated server is easy ad can be very nominal with huge discount.

Watch the video related to using cpanel

This is a instructional video demonstrating the process of installing WORDPRESS on a hosted website, using CPANEL & fantastico as the installer.

Help answer the question aboutusing cpanel

How do I control my website on a mac if I dont have a program like cpanel?
Hi, I have a mac and I don't know what to do to control a website on it. I know on windows you can use cpanel for the website control panel. I heard that there is built in features for your mac to do everything. I dont know where to find anything out. Also, if a website is setup with cpanel from windows, is it possible to use that site on a mac? Im just very confused with all of this. If anyone has information on this, please explain. Thank You.

Cpanel was created to offer an easy to use solution for website owners to cut out the middle man, or in this case, the webmaster. Most hosting companies provide Cpanel as an default option with their hosting plans.

This is often the deciding factor for most people seeking a new hosting company. If a hosting company does not provide Cpanel web interfaces, then that are not with “the program” so to speak.

Cpanel is a great way to manage your website or websites from one main interface. From the control panel main interface in your hosting account login page, you have access to many account specific modules such as email accounts, visitor stats, subdomains, domain parking, cron jobs, and more.

Most basic user friendly modules are positioned closer to the top of the accounts page. Almost anyone at any stage of Internet and computer usage abilities can use Cpanel. This is the way to programmers of Cpanel wanted it to be.

It was designed to be a user friendly interface so more average website owners could get a feel as to how the websites run and work.

As mentioned above, it is very easy to use. It was design to accommodate most ages and educational groups of computer users. To make it even more easier on the website owners, Cpanel includes a package called Fantastico.

Fantastico makes it easier for website owners to install programs such as Wordpress, Moodle, phpBB, mambo, and Joomla with one click. If website owners would try to install these programs alone, it would take hours to install them all.

But with Fantastico it takes little or no time at all. Fantastico allows owners to create blogs, discussion boards, and CMS sites right from the control panel.

The Cpanel also offers databases and database management from the main screen. This is a time saver for those who are not experts in creating databases.

The control panel makes it all the more so easier to accomplish the task of maintaining the website, from an inexperienced standpoint. The benefits outweigh any negative issues with Cpanel.

Besides ease of use, Cpanel offers freedom and gives the website owner a new appreciation and respect for the website as a whole. The Cpanel program is good for users of all levels of experience.

When choosing a hosting provider, make sure the company has Cpanel as a part of its hosting packing and see for yourself how good Cpanel is.

The only con to this great piece of software is that it takes consistent monitoring; however, it is not something that happens that often.

Hacking cPanel is just something that most webmasters need to understand. If you want to avoid it altogether, simply set up your site with “0″ sub-domains or the exact amount of sub-domains you need for your needs.

If you have 100 sub-domains with your package, ask the administrator to reduce it to 5 until you need more. In that way, you can benefit from the fantastic feature-rich cPanel interface and won’t need to deal with the crap that comes along with it.

There is so much positive advancements in using this interface, that the sub-domain problem shouldn’t be a deterrent to using it. It is definitely the best system on the market.

Watch the video related to using cpanel

ALL 22 JOOMLA LESSONS HIGH RESOLUTION FOR JUST $7 planettucker.com FREE “HOW TO MAKE A WEBSITE” GUIDE: planettucker.com HOME PAGE: planettucker.com FOR AFFILIATE WEBMASTERS ecommerceaffiliatewebmaster.com HOSTING RECOMMENDATIONS acegxhosting.com RECOMMENDED SITE BUILDERS: planettucker.com planettucker.com planettucker.com planettucker.com This tutorials covers how to use Webmail though your cpanel.

Help answer the question aboutusing cpanel

Putting links on my website using cpanel?
I am a new webmaster with a webpage that was pretty much built for me. I am wondering how I can place different links on my webpage and getting them to appear where I want them on the page usuing cpanel. I have made some minor changes but don't have a lot of experience adding and making changes on my site. Any help would be appreciated. Thanks!

Related Articles

• How to Join & Register | KV2SaltlakeAlumni.in
• MP3, GAME, AND MOVIE: YOU JUST NEED CLICK ONCE!: Fedora …
• How do i delete a user account in Vista? Review
• WEBNET HOSTING Managed Dedicated + E-Commerce Miva Merchant …
• Help with my DEP (Data Execution Prevention) -save my computer?

• [US/EU] DowntownHost – 50% off – Cpanel-Softaculous-Litespeed …
• [US/EU] DowntownHost – 50% off – Cpanel-Softaculous-Litespeed …
• cPanel – Create Full Backup » …
• 5+ Cpanel account creator scripts – press.oujda-portail.net
• Advantages of Hosting With cPanel | Dedicated Servers Info

• El tiro fantastico de Roger y Serena. | Mundo Tenis
• Buy Pills Now » Blog Archive » SE ANCHE TU SEI DIPENDENTE DA …
• Napoli, ag. Lavezzi: “Il rapporto con Mazzarri è fantastico …
• [US/EU] DowntownHost – 50% off – Cpanel-Softaculous-Litespeed …
• Napoli, agente Lavezzi: "Con Mazzarri rapporto fantastico" | News …

• Best Review Setup review site with Wordpress Ample Review
• GPS Setup with Garmin Nuvi 265 – How to Avoid the Toll Roads and …
• wordpress mapping | Wordpress Setup
• Your On-line Business – Create a WordPress Blog page Your Dynamic Hub
• members area wordpress plugin | Wordpress Setup

• Social Media B2B: To Blog or Not to Blog
• Randy Lerner must start communicating with Aston Villa supporters …
• To start the week, a big thanks…… « Dallas Drilling's Blog
• Expert services develop good solutions but nevertheless, you could …
• Start A Blog And Get Free Web Hosting From Host Gator! | Free web …

• Using Googly Bands Creatively, and a New Contest! | Googlybands's Blog
• Optimizing WordPress Blogs For your Search engines like google
• How DISA is using secure clouds « Federal Cloud Blog
• WordPress, Get the Tools You need
• Beginners Guide to Google Adsense Program | Kat's Kreations

• What to Look for in Web Hosting Terms and Conditions | Web Hosting Fan
• Different Types of Web Hosting
• How good is 100TB – Web Hosting Talk
• VPS Web Hosting Is What You Need To Stay On Top | Get Cheap Web …
• WebHostingBuzz Launches UK Web Hosting | MyHostNews: Web Hosting …

• WordPress, Get the Tools You need
• SEO Pressor – Wordpress SEO Plugin "For Dummies" | www.ryanyokome.com
• WordPress, Get the Tools You would like – voterossi.com
• InDesign plugin: Wordpress Content Browser by mwardbdn – Mysql …
• WordPress, Get the Tools You will need | maritimearmedsecurity.com

• WordPress, Get the Tools You would like – voterossi.com
• Dica de SEO para WordPress: melhores temas para SEO : Blogsss …
• WordPress, Get the Tools You will need | maritimearmedsecurity.com
• Windows Phone 7 Tutorials, Bing Share, IE Birthday Marked …
• WordPress Plugin Installation